375 horsepower – 380 Lb-Ft 350 small block Chevy

Complete ready to run includes carburetor, water pump, fuel pump, flex plate, and starter

SOLD

350 small block Chevy 1 piece rear main seal – roller block – 9.5/1 compression
750 Edelbrock carburetor – Edelbrock Performer RPM intake manifold match ported to the heads
HEI distributor
Chevy angle plug 492 fully ported cylinder heads – full roller rocker arms – custom push rods – hydraulic roller camshaft – double roller timing chain
- Cam specs Intake Duration at 050 inch Lift:
  220
  Exhaust Duration at 050 inch Lift:
  224
  Duration at 050 inch Lift:
  220 int./224 exh.
  Advertised Intake Duration:
  270
  Advertised Exhaust Duration:
  276
  Advertised Duration:
  270 int./276 exh.
  Intake Valve Lift with Factory
  Rocker Arm Ratio:
  0.495 in.
  Exhaust Valve Lift with Factory
  Rocker Arm Ratio:
  0.502 in.
  Valve Lift with Factory Rocker Arm Ratio:
  0.495 int./0.502 exh.
  Lobe Separation (degrees):
  110
Balanced and blue printed bottom end
3.48″ crankshaft – resized 5.7″ connecting rods – hyperuetectic Speed pro .030 pistons – clevite bearings
Mellings M-55 oil pump

350 block 1 piece rear main seal, roller block fully machined
750 Holley DP carburetor – Air-Gap intake manifold or RPM manifold (depends on hood clearance)
HEI distributor
Chevy 200 cc aluminum cylinder heads – Full roller rocker arms – custom push rods – Hydraulic camshaft – double roller timing chain
Balanced and spec’d bottom end
3.48″ stroke crankshaft – resized 5.7″ connecting rods – Forged Speed pro .030 pistons – clevite bearings
Mellings M-55 oil pump